Tag: diecuts

Clean and Simple

Sending Love

susanfoxbowenLeave a comment

When you’re low on crafting time, keeping things simple is key. I typically choose a simple sketch and a few coordinating supplies when I’m needing to make a card but don’t have time for lots of layers or fussy cutting. The beautiful thing about the products Stampin’ Up! offers is how wonderfully they coordinate to give you consistent results each and every time. And I don’t say that simply because I’m a demonstrator. It’s one of THE reasons that I became a demonstrator!

We begin our card today with a base of Berry Burst cardstock. The background panel is cut a tad smaller than the card base and then machine embossed using the Distressed Tile embossing folder. I decided from the get-go that I wanted metallic gold to be an accent color for this card design, so after embossing the Berry Burst quarter-sheet and cutting it to size, I used my finger to lightly rub metallic gold ink across the card front to bring out the gorgeous pattern. A two-inch strip of Thoughtful Journey designer paper is adhered to the left side of the embossed panel, leaving a small strip of the panel exposed on the left so that the pattern goes from edge to edge in the background. This whole panel is then adhered to the base using dimensionals. The sentiment from Country Flowers is stamped on white cardstock diecut using the Unbounded Love dies and it, too, is adhered with dimensionals. A twist of gold trim and a few gold Blooming Pearls add that bit of sparkle and bring out the golden hues in the designer paper. And a few In Color shimmer gems on either side of the sentiment ensure your eye lands here last.

Tune in tomorrow to check out a variation on this card layout that gives us a very different look but results in a card that’s just as stunning!

Products used for today’s card:
Berry Burst, Basic White cardstock
Thoughtful Journey DSP
Country Flowers stamps
Unbounded Love dies
Distressed Tile embossing folder
In Color shimmer gems, Blooming Pearls
Gold trim
Dimensionals
Adhesives

Fun Folds

Brighter Tomorrow

susanfoxbowenLeave a comment

Hello, friends! I hope your week has gotten off to a good start. Thanks so much for hanging with me as I took a little break to tend to my hubby who was in the hospital. I’m pleased to report that we are now home! And as the saying goes, there really IS no place like home!

Over the weekend, I had a small bit of time to play around with some of the products I purchased from the new Annual Catalog. I kept things really simple and used a few sketches that I pulled from my sketch book.

Today’s card is a faux fold-over fun fold card. The center section lifts up, just as a fold-over would, but this card is constructed entirely of the card base without any extra layers like the usual fold-over design has. The front panel of the card is cut to give you a large center section and the two small side sections are adhered to the card base so that, rather than the entire card front opening, only the panel in the middle opens. I like to call this a fun fold cheat because it has all the pretty and half as much work — haha!

We begin with a base of Petunia Pop cardstock, which is one of the new In Colors. The base is cut to standard size and scored in the center. After selecting a side to serve as the card front, cut a one-inch strip on each side of the card front, leaving a larger panel in the center. Be sure you’re only cutting from the bottom edge to the center score line. Next, choose and cut a piece of the Thoughtful Journey designer paper so that it is slightly smaller than the entire card front. Then cut a three-quarter inch strip from each side. This will leave you a center piece of designer paper that should lay perfectly over the entire center flap of the card front, leaving only the small border of Petunia Pop on the top and bottom. The sentiment from Unbounded Love is stamped in Petunia Pop and black on a piece of vellum diecut using the Nested Essentials set. It’s adhered to the center section using glue dots on each end. A few sequins and a paper butterfly finish things off and draw the eye across the card to rest on the sentiment.

I have a few more cards to share this week from my weekend crafting mini session and hope to get back into the swing of things as we settle into an appointment schedule here at home.

Products used in today’s card:
Petunia Pop, vellum cardstock
Thoughtful Journey DSP
Unbounded Love stamps
Nested Essentials dies
Paper butterflies
Shiny sequins
Dimensionals
Adhesives

Retiring · Zany Zoo

Something Great

susanfoxbowenLeave a comment

We’re rounding out this week with our zoo pals at the theatre. Before my son was born, I spent quite a bit of time in theatres in my area performing opera, musical theatre, and sacred music. There’s nothing quite like the feeling of being onstage, and I’ve been pleased to be able to return to some singing over the last year.

Today’s card actually combines two card designs that I saved in my inspiration folder quite some time ago. And I decided to combine them by using the barn fold fun fold to build the drama of waiting for the curtains to open and then starting the show.

We start with a base of Basic White cardstock. The standard sized base is scored so that there are two equal sized flaps serving as the card front, which creates the barn fold. A piece of Lemon Lolly cardstock and a strip of Basic Black serve as the background. Using the Zany Zoo dies, I diecut curtain panels from Pool Party cardstock. The curtain tie backs are cut from Distressed Gold specialty paper using the tie back die. The chairs are cut from Real Red using the base of the llama die. The silhouettes of the audience members are diecut from Basic Black using the llama and ballerina dies. The canned lights are diecut from black using the vase die and strips of vellum serve as light beams pointing to the sentiment in the center. The sentiment from Zany Zoo is stamped on white cardstock and then diecut using the Hot Air Balloon dies. The sentiment panel is adhered to the left panel of the card front using dimensionals.

The interior scene has another set of Pool Party curtain panels. The sentiment from Something Fancy is stamped in black on the center panel. The stage floor panels are diecut from Crumb Cake cardstock using the Filled With Fun wagon panels that I cut apart using paper snips. The base of the stage is a strip of black cardstock. The spotlight coming down center stage is a strip of gold vellum. The adorable ballerina is diecut from the Zoo Crew designer paper using the coordinating dies. I’ve placed her on a double layer of dimensionals to ensure she stands above the scene and really catches the eye. Things are finished off with some glitter sequins to reinforce the *magic* of the scene.

I’ve had a lot of fun taking our zoo friends on adventures this week, and I hope you’ve enjoyed tagging along! I’ll be taking a few days off next week to be with my hubby in the hospital. But I’ll be back with some more crafting goodness soon!

Products used in today’s card:
Pool Party, Crumb Cake, Real Red, Lemon Lolly, Basic Black, Basic White, vellum cardstock
Zoo Crew, Distressed Gold DSP
Something Fancy, Zany Zoo stamps
Zany Zoo, Hot Air Balloon, Filled With Fun dies
Glitter sequins
Dimensionals
Adhesives

Botanicals · Coming Soon · Mother’s Day

Zinnias for You

susanfoxbowenLeave a comment

Things have really begun to green up in our area and I’ve begun making treks to my favorite garden center to fill my patio pots. I really love having a yard full of color! For our growing area, I have to choose plants that not only like our mild springs but that really love the sweltering heat of summer. And one of my all-time garden favorites is zinnias. They come in a wide variety of colors, are fairly bug resistant, and don’t mind the Texas heat one bit — winner!

When Stampin’ Up! released the Flowering Zinnias suite in the latest Online Exclusives, I immediately fell in love with the designer paper. I wasn’t quite so sure about the stamps or dies. If I’m being honest, I didn’t immediately like the stamps or dies because I felt like they were a little too fussy and I was intimidated by the thought of trying to use them. But I was soon convinced that I needed them when I began seeing all of the drop-dead stunning designs my fellow stampers were making with them.

Believe me when I tell you that this card looks way more complicated than it actually is to assemble. The dies really do do all of the work for you. And just look at the stunning results!

We start with a base of Flirty Flamingo cardstock. I next diecut a quarter panel of the same and then embossed using the Zinnia embossing folder. This panel is cut slightly smaller than the card base. I then began diecutting flowers from Real Red and Calypso Coral cardstock using the Simply Zinnias dies. The flower centers are a combination of Pumpkin Pie and Daffodil Delight. Next are the leaves, which have been diecut from Shaded Spruce and Old Olive. The smaller flowers are diecut from Lemon Lolly. The sentiment from Perennial Postage is stamped on white cardstock and then diecut using the soon-to-release Unbounded Love dies.

The embossed Flirty Flamingo panel is adhered directly to the card base. I next assembled the flowers. To assemble, I used dimensionals between the two flower petal layers. A large Zot glue dot secures the orange center to the top layer of petals and then I used a fine tip glue pen to add adhesive to the circle of small flowers that sits atop the flower center. For the smaller budding flowers, a glue dot adheres the flower to the stem.

To complete the card, I began by adhering the sentiment to the center with dimensionals. The red flowers come next and are also adhered to the card front using dimensionals. The leaves are layered underneath the flowers and secured with glue dots. The Calypso Coral flower is secured directly to the card base with a large Zot glue dot to give dimension to the look. The small stem of accent flowers is secured with a single dimensional, while the flowers themselves are held in place with glue dots. Shiny sequins finish off the design with some flare and a bit of sparkle.

I’ll be bringing you some BONUS content tomorrow of brand NEW product as we take a romp through the meadow using the gorgeous Unbounded Beauty and Thoughtful Journey products. You won’t want to miss it!

Products used for today’s card:
Flirty Flamingo, Real Red, Calypso Coral, Pumpkin Pie, Daffodil Delight, Lemon Lolly, Shaded Spruce, Old Olive, Basic White cardstock
Perennial Postage stamps
Simply Zinnia, Unbounded Love (coming soon!) dies
Zinnia embossing folder
Shiny sequins
Glue dots
Dimensionals
Adhesives

Botanicals · Mother’s Day

Lavender for You

susanfoxbowenLeave a comment

This week, we’re touring fields and flowers as we explore some of my favorite Stampin’ Up! products. And stopping to smell the lavender from yesterday’s lovely hillside was just too tempting. In fact, today we have a whole bouquet.

From top to bottom, the Perennial Lavender suite in the January Mini Catalog is one of my favorite releases to date. There is not one single element in the suite of products that leaves me wondering what I’ll do with it, which is honestly pretty rare for me. Portions of this suite of products will be fully retired when the new Annual Catalog releases. So if you’ve been on the fence about buying this suite, time is of the essence before portions of it are gone for good!

Being that Mother’s Day is just around the corner, it seemed fitting to design a card perfect for the occasion. Today’s card design begins with a base of Highland Heather cardstock. The focal panel base is a sheet of the Perennial Lavender designer series paper, and I have distressed the edges with my paper trimmers to give it a well-worn look. The lavender bunch is stamped on white cardstock using the Painted Lavender stamp set and then diecut using the coordinating die set. To give the fronds of lavender a more realistic look, I used three different shades of purple — Highland Heather, Gorgeous Grape, and Fresh Freesia. The flower bunch is tied together with linen thread. The sentiment from the Perennial Postage set is stamped on white cardstock and diecut using the Thoughtful Expressions dies. I cut a coordinating mat from white glimmer paper using the next die size up. I added a paper butterfly to further soften the feel of the card and finished things off with classic matte dots and purple shimmer gems.

Later today, we’ll be enjoying another fresh bouquet. I’ll hope you’ll pop back by to check it out!

Products used in today’s card:
Highland Heather, Basic White cardstock
Perennial Lavender, white glimmer DSP
Painted Lavender stamps & dies
Perennial Postage stamps
Thoughtful Expressions dies
Paper butterfly
Classic matte dots, purple shimmer gems
Linen thread
Dimensionals
Adhesives

Botanicals

Hello, Lavender Fields

susanfoxbowenLeave a comment

As promised, I’m back! Thanks for hanging with me as I worked to get my husband settled in back home for a few days before we head back to the hospital for the next big surgery. Hats off to all of the full-time caregivers out there — it’s definitely a big job!

I’m super excited to get back to scheduled programming and take a stroll through the hills and fields of flowers. I’m going to showcase some of my favorites from the current and soon-to-release Stampin’ Up! lineup. I hope you’ll plan to come along for the whole trip!

Today, we’re walking the Hills of Tuscany, using the stamp set by the same name. This lovely stamp set is on the Last Chance list, and I’m sad to see it go! But this is a set that will definitely be staying in my crafting stash for making beautiful landscape scenes.

Now, let’s take a closer look at how today’s card came together. I chose to have a lavender theme for this landscape. We get started with a base of Crumb Cake cardstock. The back panel of the focal section of this card is a quarter-sheet of Crumb Cake that has been diecut with the largest Deckled Rectangles die and then machine embossed with the Distressed Tile embossing folder. To help the beautiful embossed detailing stand out a bit more, I gave it an aged look by sponging Crumb Cake ink over the top. It’s also elevated with dimensionals to give depth to the design. The focal panel mat is Gorgeous Grape cardstock that has been diecut with the Deckled Rectangles dies, while the focal panel is a sheet of white cardstock diecut with the nesting rectangle from the same set of dies. The focal panel landscape scene is stamped using the Hills of Tuscany stamp set.

The sentiment panel is diecut from Crumb Cake cardstock using the soon-to-release Unbounded Love dies. The lavender bunch is diecut from Gorgeous Grape using the Painted Lavender dies and tied together using linen thread. The frame is adhered directly to the focal panel, while the sentiment portion is popped up on dimensionals to ensure the sentiment isn’t lost in the scene.

Two strips of the Perennial Lavender designer series paper behind the focal panel finish off this design. They serve to begin the eye’s journey across the card front. Notice how the purple elements form a visual triangle across the card front as your eye passes from this strip of DSP to the sentiment panel to the field of lavender in the landscape to the gems in the bottom-right corner.

TIP: when you overlap stamped images from this stamp set, it creates darker areas that add depth and shading. Notice the darker green path in the hill that was created in this fashion. I still have a lot to learn when it comes to this technique, but I have enjoyed experimenting with the layering. Should we make this an episode of Terrific Tuesdays? I would love to know your thoughts!

Products used in today’s card:
Crumb Cake, Gorgeous Grape, Basic White cardstock
Perennial Lavender DSP
Hills of Tuscany stamps
Deckled Rectangles, Unbounded Love (coming soon!) dies
Distressed Tile embossing folder
Purple fine shimmer gems
Linen thread
Dimensionals
Adhesives

Clean and Simple · Fun Folds

Picked for You

susanfoxbowenLeave a comment

This week, we’ll be frolicking in the meadows and stopping to smell a few flowers along the way. Stampin’ Up! has a whole host of papers and stamps that put us squarely in the middle of beautiful fields and fragrant flower patches. And we’re going to explore some of my favorites throughout this week.

We begin today with a new take on an old fun fold. I recently ran across the hidden barn fold design and knew I had to give it a try. Why is it called a hidden fold? When the card is completely closed, the two sections of the front panel meet, they make the center cut virtually disappear.

So our take on this card begins with a base of Blackberry Bliss cardstock. The focal panel consists of a bottom mat of Lost Lagoon soft shimmer paper that is diecut using the largest Perennial Postage die, followed by a layer of Highland Heather cut just a tick smaller, and finally with our section of Meandering Meadow designer paper on top. To accomplish the two perfect sections, I cut the shimmery layer in half after I diecut it. I adhered the DSP and Highland Heather mat together first before also cutting them in half with the trimmer. Then these three layers were adhered together before carefully adhering them in place on the card front so that they meet together perfectly at the center. The sentiment from Charming Sentiments is stamped on white cardstock and diecut using the smallest Thoughtful Expressions die. The sentiment mat is cut from Lost Lagoon shimmer paper. A twist of silver & white sheer ribbon and Lost Lagoon bordered ribbon are adhered in between the two sentiment layers. Using dimensionals, the sentiment is adhered to the left flap of the card front. I added a few purple fine shimmer gems for sparkle and to move the eye diagonally across the card front.

This particular design is super easy to put together. And by changing the color palette and DSP, each card has a completely different look. This is going to be a go-to design for me if I need to make a whole host of simple yet beautiful cards!

Tune in tomorrow as we explore the rolling Hills of Tuscany!

Products used in today’s card:
Blackberry Bliss, Highland Heather, Basic White cardstock
Meandering Meadow, Lost Lagoon soft shimmer DSP
Charming Sentiments stamps
Thoughtful Expressions, Perennial Postage dies
Silver & white sheer trim, Lost Lagoon bordered ribbon
Purple fine shimmer gems
Dimensionals
Adhesives

Coming Soon

Lifting Me Higher

susanfoxbowenLeave a comment

Our journey through the skies comes to an end today as we round out our aviation-themed trek through the Stampin’ Up! lineup. And today’s card is a full sneak peek at the brand NEW suite of products called Take to the Sky. The full suite includes stamps, coordinating dies, designer series paper, and silver trinkets. This suite will have you soaring when it releases in May!

Our card today begins with a base of Balmy Blue cardstock. The backdrop for our focal panel is a sheet of the cloud pattern designer paper. On top is another sheet with a radar view pattern. I cut a hole towards the top of the radar sheet using the Everyday Details dies, which allows the cloud pattern to peek through. And I reinforced this peek-through look by diecutting clouds from vellum using the Bright Skies and Hot Air Balloon dies. I stamped the largest plane from the Adventurous Skies stamp set onto white cardstock, colored the body of the plane with Stampin’ Blends, and then diecut with the coordinating die. I drew further attention to the spinning propeller by diecutting the smallest circle from Everyday Details from vellum. I added an Industrial Trinket to give a realistic look to the center of the spinning propeller. The sentiment from Adventurous Sky is stamped directly on vellum and then diecut using the Bright Skies dies. I scattered a few additional trinkets and some translucent sequins to tie things together and help the eye move across the card.

There are so, so many more designs I would like to try with this super fun suite of products that I plan to highlight this suite for a full week once it releases with the brand new Annual Catalog in May. In the meantime, next week we’ll be romping through the grassy plains and fields of flowers. I hope you’ll come along!

Products used in today’s card:
Balmy Blue, Basic White, vellum cardstock
Take to the Sky DSP (coming soon!)
Adventurous Sky bundle (coming soon!)
Industrial trinkets (coming soon!)
Stampin’ Blends
Sequins trio
Dimensionals
Adhesives

Coming Soon

Speedy Recovery

susanfoxbowenLeave a comment

We’re continuing our aviation adventures this week by taking a closer look at the brand NEW Adventurous Sky bundle, which is set to release in May with the launch of the new 2024-25 Stampin’ Up! Annual Catalog. This week’s chosen theme of flight is inspired by husband, who is a commercial pilot and aviation enthusiast.

And the theme of today’s card, in particular, is also inspired by my hubby, who has been having some serious health issues. When we’re making get well cards, we don’t often think of incorporating someone’s hobbies or interests when designing cards, but when you want something to feel very personalized for a recipient, I believe that’s the best way to do it!

Our card today is set on a base of Balmy Blue cardstock using the fold-back fun fold, which allows a portion of the inside panel to peek through when the card is fully closed. Before I adhered the fold-back portion of the card front, I used the Adventurous Sky cloud stamps to stamp a background on the entire inside-left panel. I also adhered the raindrop-embossed piece of vellum to the edge of the fold-back panel and then adhered it to the card front. On the exposed portion of the inside message panel, I chose the topography patterned sheet from the Take to the Sky designer series paper pack — the coordinating DSP to Adventurous Sky that will release in May.

The plane is cut from the Silver and Berry Burst sheets of Holographic specialty paper using the Adventurous Sky dies. But you might be thinking that it doesn’t look red. This particular sheet of paper looks blue when it’s cut into smaller pieces and from certain angles in larger pieces, and so by diecutting and then putting the plane on the diagonal, you see blue in this design. Neat, huh?! To give the illusion of a spinning prop, I cut a circle from vellum using the smallest die in the Everyday Details set. The center of the prop is made with the soon-to-be-released Industrial Trinkets piece.

The sentiments from Happy Little Things are stamped on white cardstock that is diecut from white cardstock using the Deckled Rectangles dies. A twist of silver & white sheer ribbon and the white sequins tie with the metallic elements of the plane and finish the visual triangle across the card design.

I hope you’ll fly by tomorrow to get a better look at the full Take to the Sky suite — paper, stamps, dies, and embellishments!

Products used in today’s design:
Balmy Blue, Basic White, vellum cardstock
Holographic Trio, Take to the Sky (coming soon!) DSP
Happy Little Things stamps
Deckled Rectangles, Adventurous Sky (coming soon!) dies
Raindrops embossing folder
Sequins trio, Industrial Trinkets (coming soon!)
Silver & white sheer ribbon
Dimensionals
Adhesives

Coming Soon

Flying Hi

susanfoxbowenLeave a comment

This week, we’re taking to the skies with some Stampin’ Up! flying-themed products. Thus far, we’ve made some cute cards using the Hot Air Balloon bundle. And today, I’m sharing a sneak peek of a brand NEW bundle that will be available in the upcoming 2024-25 Annual Catalog that releases in May.

Say hello to Adventurous Sky! Did you know that my husband is a commercial pilot? And he’s the inspiration for this week’s theme and the reason that I just had to have this new aviation-themed bundle!

Like all of the Stampin’ Up! product line, the NEW Adventurous Sky stamps and dies pair perfectly with other existing product lines. For today’s card designed, I’ve paired it with the Bright Skies and Hot Air Balloon bundles to make this fun card.

Our card starts with a base of white cardstock. The focal panel is built on a background of Pool Party cardstock that has been diecut using the largest Deckled Rectangles die. I cut a variety of clouds using the Bright Skies and Hot Air Balloon dies and layered them across the background for lots of billowy dimension. The hot air balloon combines a Berry Burst balloon with a white glimmer banner and Bubble Bath frills — the whole balloon made with the Hot Air Balloon bundle. The staggerwing aircraft is the medium-sized airplane stamp in the Adventurous Sky stamp set. It’s stamped in black and then colored with Stampin’ Blends before being diecut with the coordinating die. The sentiment is also from the Adventurous Sky stamp set. The scene is finished off with a combination of white sequins from the Sequins Trio and the Pool Party dots from the Rainbow Dots set.

Fly back in tomorrow to see more of the Adventurous Sky set at work!

Products used in today’s design:
Pool Party, Berry Burst, Basic White cardstock
White glimmer, Bubble Bath soft shimmer SP
Hot Air Balloon, Adventurous Sky (coming soon!) bundles
Bright Skies dies
Sequins trio, rainbow dots
Dimensionals
Adhesives